10.
Connect all cables and external attachments.
11.
Connect the power cord to the electrical outlet.
12.
Power on the NAS.
Expansion Card Installation
The TVS-x72XT supports selected expansion cards, some of which require QNAP PCIe brackets. QNAP-
branded expansion cards purchased from the company website are shipped with the brackets necessary to
fit all QNAP NAS models.
For details on supported expansion cards and brackets, go to
http://www.qnap.com/compatibility
.
Installing Expansion Cards on the TVS-472XT
Note
This process applies only to the TVS-472XT. For details on the TVS-672XT or
TVS-872XT, see
Installing Expansion Cards on the TVS-672XT and TVS-872XT
.
Warning
• Only qualified personnel should perform the following steps. Failure to follow
instructions can result in serious injury or death.
• Observe electrostatic discharge (ESD) procedures to avoid damage to components.
1.
Check the expansion cards and brackets supported by your model on the QNAP website.
a.
Go to
www.qnap.com/compatibility
.
b.
Click
Search by NAS
.
c.
Specify the number of bays and the specific model of your NAS.
d.
Under
Category
, select the component or device type.
TVS-x72XT User Guide
Installation and Configuration
25
