11.
Connect all cables and external attachments.
12.
Connect the power cord to the electrical outlet.
13.
Power on the NAS.
Installing Expansion Cards on the TVS-672XT and TVS-872XT
Note
This process applies only to the TVS-672XT and TVS-872XT. For details on the
TVS-472XT, see
Installing Expansion Cards on the TVS-472XT
.
Warning
• Only qualified personnel should perform the following steps. Failure to follow
instructions can result in serious injury or death.
• Observe electrostatic discharge (ESD) procedures to avoid damage to components.
1.
Check the expansion cards and brackets supported by your model on the QNAP website.
a.
Go to
www.qnap.com/compatibility
.
b.
Click
Search by NAS
.
c.
Specify the number of bays and the specific model of your NAS.
d.
Under
Category
, select the component or device type.
e.
Locate a specific component or device model on the list.
f.
Optional: Click the corresponding
Note
icon to view more information.
2.
Power off the NAS.
3.
Disconnect the power cord from the electrical outlet.
TVS-x72XT User Guide
Installation and Configuration
30
