11.
Connect the power cord to the electrical outlet.
12.
Power on the NAS.
13.
Verify that the module is recognized by the NAS.
a.
Log on to QTS as administrator.
b.
Go to
Control Panel
>
System
>
System Status
>
Hardware Information
.
c.
Check the value for
Total memory
.
QTS Installation
The TVS-x72XT uses the QNAP QTS operating system. You can install QTS using any of the following
methods.
Method
Description
Requirements
Qfinder Pro
installation
(Recommended)
If the NAS is connected to your local area
network, you can do the following:
• Locate the NAS using Qfinder Pro.
• Complete the steps in the Smart
Installation Guide wizard.
For details, see
Installing QTS Using
Qfinder Pro
.
• Computer
• Network cable
• Qfinder Pro installer
Cloud installation
If the NAS is connected to the internet,
you can do the following:
• Scan the QR code on the NAS.
• Log into your myQNAPcloud account.
• Use CloudLink to remotely access
your NAS.
• Complete the steps in the Smart
Installation Guide wizard.
For details, see
Installing QTS Using the
Cloud Key
.
• Computer or mobile device
• Network cable
• myQNAPcloud account
• CloudKey
Local installation
If the NAS supports HDMI output, you can
do the following:
• Connect the NAS to the required
hardware.
• Complete the steps in the Smart
Installation Guide wizard.
For details, see
Installing QTS Using an
HDMI Connection
.
• Monitor
• HDMI cable
• USB keyboard or Remote control (not
available on all models)
TVS-x72XT User Guide
Installation and Configuration
36
