Replacing Memory Modules
The TVS-x72XT has two memory slots. You can increase the memory capacity of the NAS by upgrading the
memory modules. When using two modules, use only QNAP modules of the same type and capacity to
maintain system performance and stability. You can purchase QNAP memory modules from authorized
resellers.
Warning
• Only qualified personnel should perform the following steps. Failure to follow
instructions can result in serious injury or death.
• Observe electrostatic discharge (ESD) procedures to avoid damage to components.
1.
Power off the NAS.
2.
Disconnect the power cord from the electrical outlet.
3.
Disconnect all cables and external attachments.
4.
Remove each drive tray from the NAS.
a.
Slide the lock down.
b.
Pull the tray handle outward.
c.
Pull the tray out.
5.
Position the NAS on its right side.
6.
Remove an existing module.
a.
Push the retention clips outward simultaneously to release the module.
TVS-x72XT User Guide
Installation and Configuration
33
