c.
Slide the lock up.
5.
Power on the NAS.
Installing M.2 Solid-state Drives
Warning
• Only qualified personnel should perform the following steps. Failure to follow
instructions can result in serious injury or death.
• Observe electrostatic discharge (ESD) procedures to avoid damage to components.
Note
• The TVS-x72XT has two M.2 SSD slots. For a list of compatible M.2 SSDs, go to
https://www.qnap.com/compatibility
.
• QNAP recommends installing heatsinks on M.2 SSD controllers to enhance cooling
efficiency and ensure consistent performance.
• Before installing non-QNAP heatsinks, ensure that they are of the appropriate size and
shape.
1.
Power off the NAS.
2.
Disconnect the power cord from the electrical outlet.
3.
Disconnect all cables and external attachments.
4.
Remove the case cover.
a.
Remove the screws that secure the case cover to the chassis.
b.
Slide the cover back.
c.
Lift the cover until it is completely detached from the chassis.
TVS-x72XT User Guide
Installation and Configuration
21
