Qlogic SANsurfer FC/CNA HBA CLI, Руководство пользователя

Страница: 167 / 348

3–Interactive Commands
FCoE Menu (Command Line Option -cna)
SN0054614-00 K 3-115
Display Settings
16: FCoE 3: DCE Statistics 1: Display Settings
Select the Display Settings option to show the current DCE statistics settings for
the selected adapter, for example:
---------------------------------------
DCE Statistics Settings
---------------------------------------
AutoPoll (AP): 10
SetRate (SR): 5
LogToFile (LF): N/A
Details (DT): 0
Auto Polling
16: FCoE 3: DCE Statistics 2: Auto Polling
Select the Auto Polling option to open the Statistics Poll Menu , which shows
your current setting as either Auto Poll or Manual Poll . To change the polling
method, select the appropriate option.
Set Rate
16: FCoE 3: DCE Statistics 3: Set Rate
Select the Set Rate option to view the current Sampling Rate in seconds. To
change the sampling rate, enter a numeric value between 5 and 30.
Set Details
16: FCoE 3: DCE Statistics 4: Set Details
Select the Set Details option to view the current DCE Statistics Details . To
change the detail setting from the current setting to one of the other two options,
select that option, and then press ENTER. The example below indicates that
Absolute is the current setting; you can change the setting to either Rate (Per
Second) or Baseline .
1: Absolute (Current)
2: Rate (Per Second)
3: Baseline
Start
16: FCoE 3: DCE Statistics 5: Start
Select the Start option to view (run) the DCE statistics details for the selected
converged network adapter with the Absolute
1
setting. For example:
1 DCE statistics run with the Rate or Baseline settings instead of the Absolute setting
will generally show all zeroes, except for the
Receive
totals.