Qlogic SANsurfer FC/CNA HBA CLI, Руководство пользователя

Страница: 129 / 348

3–Interactive Commands
Diagnostics Menu (Command Line Options -kl, -kr, and -dm)
SN0054614-00 K 3-77
When you select this option from the Main Menu , SANsurfer FC/CNA HBA CLI
shows Diagnostics Menu with the standard list of adapter ports. Type the
number for the port on which you want to run diagnostic tests and then press
ENTER.
When you select an adapter port from the Diagnostics menu, SANsurfer FC/CNA
HBA CLI shows the list of diagnostic tests you can run for that port, including:
„ Loopback Test
„ Read/Write Buffer Test
„ Transceiver Details (available on 4Gb and 8Gb only)
Test Results
Test results for loopback and read/write buffer tests may include
the following:
„ Loopback test results:
‰ Test Status
‰ CRC Error
‰ Disparity Error
‰ Frame Length Error
„ Read/Write buffer test results:
‰ Loop ID/Status
‰ Data Miscompare
‰ Link Failure
‰ Loss of Sync
‰ Loss of Signal
‰ Invalid CRC
Diagnostics Loopback Test
(Command Line Option -kl)
12: Diagnostics n : Port Number 1: Loopback Test
When you select the diagnostics Loopback Test option, SANsurfer FC/CNA HBA
CLI shows the Loopback Test Menu containing the following options (see
page 3-79 ):
NOTE:
The diagnostic loopback test and transceiver details are not available for the
QLE8042 adapter.
The QLE81
xx adapters support only the external loopback test and require a
loopback connector.