Qlogic SANsurfer FC/CNA HBA CLI, Руководство пользователя

Страница: 43 / 348

SN0054614-00 K 2-1
2
Getting Started
This chapter provides the following sections to help you get started using
SANsurfer FC/CNA HBA CLI:
„ “Starting Interactive Mode” on page 2-1
„ “Starting Non-Interactive Mode” on page 2-4
„ “Terminology” on page 2-9
„ “Advanced Features” on page 2-10
SANsurfer FC/CNA HBA CLI Modes
SANsurfer FC/CNA HBA CLI operates in two modes:
„ Interactive (menu-driven). The CLI starts and prompts for user input. Based
on the input, the CLI executes the specified commands until terminated by
the user. Use this mode to do multiple operations.
3 Interactive Commands
covers this interface.
„ Non-interactive (command line). The CLI starts, executes the functions
defined by the list of parameters provided, and then terminates. Use this
mode to run SANsurfer FC/CNA HBA CLI from a script file or when you want
to do a single operation.
4 Non-Interactive Commands covers this interface.
SANsurfer FC/CNA HBA CLI is not case sensitive in either mode. However, file
names in some operating systems are case sensitive; in this case, SANsurfer
FC/CNA HBA CLI
is case sensitive for that specific file.
Starting Interactive Mode
To start SANsurfer FC/CNA HBA CLI in interactive mode, use one of these
methods:
„ For Windows, click the SANsurfer FC/CNA HBA CLI icon on the desktop.
„ For Linux or Solaris, open a command window and type one of the following:
scli INT
scli