Qlogic SANsurfer FC/CNA HBA CLI, Руководство пользователя

Страница: 261 / 348

B–XML Format 2
XML Format 2 Tags for Each Option
SN0054614-00 K B-5
FrameSize="value"
HardLoopId="value"
LoopResetDelay="value"
EnableHostAdapterBIOS="value"
EnableHardLoopId="value"
FibreChannelTapeSupport="value"
OperationMode="value"
IntDelayTimer="value"
ExecutionThrottle="value"
LoginRetryCount="value"
EnableLipReset="value"
PortDownRetryCount="value"
EnableLipFulllogin="value"
LinkDownTimeout="value"
EnableTargetReset="value"
LUNsPerTarget="value" />
</HBA>
<Status> n </Status>
<Reboot> n /Reboot>
</QLogic>
The
<HBA> …</HBA>
sequence repeats for each adapter
Each parameter is listed on a separate line for clarity; however, multiple
parameters can be on the same line.
For multiple adapters, repeat the preceding sequence with the ID number
(ID Number="value")
of the next adapter.
Display HBA Information
(Command Line Option -I)
The command format is:
scli -i (< hba instance > | < hba wwpn > | all) -x2
Another version of the command shows all information or VPD information:
scli -i [all] [vpd] -x2
The XML Format 2 for adapter general information is as follows:
<?xml version="value" encoding="value"?>
<QLogic>
<AppName>SANsurfer FC/CNA HBA CLI</AppName>
<AppVersion>vn.n.nn Build nn</AppVersion
<AppXmlVersion>n.nn</AppXmlVersion>
<HBA>
<GeneralInfo Instance="value"
HBAModel="value"
HBAID="value"
HBAAlias="value"