Qlogic SANsurfer FC/CNA HBA CLI, Руководство пользователя

Страница: 180 / 348

4–Non-Interactive Commands
Command Summary
4-6 SN0054614-00 K
You cannot combine the command
-f
with any other options:
„
-f
= Input Parameter Options from a Text File (see “-f (Input Parameter
Options from a Text File)” on page 4-13 ). For example:
# scli -f command.txt
In addition, the following general rules for commands apply:
„ Only one command line option per input file is valid.
„ You can use either the hyphen (-) character or the forward slash (/)
character. For example, both of these commands are valid:
scli -g
scli /g
Table 4-2 defines the command variables.
.
-a
(View or Toggle Beacon Status)
Use the
-a
command to either view (1) or change (2) the status of a beacon.
Table 4-2. Command Variables
Variable Definition Format
<
hba instance
>
Adapter number
a
a
You can use the -g command to find adapter numbers.
< hba wwpn >
Adapter world wide port
name xx-xx-xx-xx-xx-xx-xx-xx or
xxxxxxxxxxxxxx
<
alias
>
Adapter alias
Symbolic adapter
b
name
b You assign the symbolic name. It is limited to 100 characters in length.
<
target wwnn
>
Target world wide node
name xx-xx-xx-xx-xx-xx-xx-xx or
xxxxxxxxxxxxxx
<
target wwpn> Target world wide port
name xx-xx-xx-xx-xx-xx-xx-xx or
xxxxxxxxxxxxxx
<
target port id
>
Target port ID xx-xx-xx or xxxxxx
<
target id
>
Target ID
<
lun id
>
Logical unit number (0–255)
<
address
>
IP address xxx.xxx.xxx.xxx
(speed)
Target link speed 1.2 or 4 GHz, or 8G
Table Notes