Qlogic SANbox 6142, Руководство пользователя

Страница: 90 / 314

7 – SANsurfer iSCSI/FC Router Manager
System Tree Window
7-20 FI0054601-00 A
Q
When you select an FC port in the system tree, the system displays the Advanced
Configuration tabbed page (see figure 7-19) .
Figure 7-19. FC Port Advanced Configuration Tab
The following FC port advanced configuration is displayed:
■
Connection Options : the connections are not changeable. When a FC port is
not part of an FCIP route it only operates in FC loop mode.
■
Data Rate : contains a dialog box that provides three options for data rate; auto,
1 Gbps and 2 Gbps. The default is auto. If you change this setting, you must
click
Save (at the bottom of the page) for the change to take effect.
■
Frame Size : contains a dialog box that provides three options for frame size;
2048, 1024 and 512 bytes. The default is 2048. If you change this setting, you
must click
Save (at the bottom of the page) for the change to take effect.
■
Execution Throttle : contains a dialog box that provides five options for execution
throttle; 16, 32, 64, 128 and 256. The default is 64. When you change this setting,
you must click
Save (at the bottom of the page) for the change to take effect.