Qlogic SANbox 6142, Руководство пользователя

Страница: 297 / 314

FI0054601-00 A D-1
Appendix D
Simple Network Management Protocol (SNMP)
D.1
Introduction
Simple network management protocol (SNMP) provides monitoring and trap
functions for managing the router through third party applications that support
SNMP. The router firmware supports SNMP versions 1 and 2 and a QLogic
management information base (MIB)
(see section D.2) . Traps may be formatted
using SNMP version 1 or 2 (see section D.3) .
D.1.1
SNMP Properties
The SNMP properties can be set using either the command line interface (see
section A.25.9) or the GUI.
Table D-1 describes the SNMP properties.
Table D-1. SNMP Properties
Parameter Description
Read community A password that authorizes an SNMP management server to
read information from the router. This is a write-only field. The
value on the router and the SNMP management server must be
the same. The read community password can be up to
32 characters
excluding the number sign (#), semicolon (;), and
comma (,). The default is password is public .
Trap community A password that authorizes an SNMP management server to
receive traps. This is a write-only field. The value on the router
and the SNMP management server must be the same. The trap
community password can be up to 32 characters
excluding the
number sign (#), semicolon (;), and comma (,). The default
password is
public .
System location Specifies the name of the router location. The name can be up
to 64 characters
excluding the number sign (#), semicolon (;),
and comma (,). The default is undefined.
System contact Specifies the name of the person to be contacted to respond to
trap events. The name can be up to 64 characters
excluding the
number sign (#), semicolon (;), and comma (,). The default is
undefined.
Authentication traps Enables or disables the generation of authentication traps in
response to authentication failures. The default is disabled.