Qlogic SANbox 6142, Руководство пользователя

Страница: 217 / 314

A – Command Reference
Set Command
FI0054601-00 A A-45
Q
A.25.2
Set FC Command
Configures a Fibre Channel port.
Authority
Admin session
Syntax
set fc [port_num]
Parameters
[port_num]
The number of the FC port to be configured.
Examples
The following is an example of the Set FC command:
QRouter (admin) #> set fc 1
A list of attributes with formatting and current values will follow.
Enter a new value or simply press the ENTER key to accept the current value.
If you wish to terminate this process before reaching the end of the list
press 'q' or 'Q' and the ENTER key to do so.
WARNING:
The following command might cause a loss of connections to both ports.
Configuring FC Port: 1
-------------------------
Port Status (0=Enable, 1=Disable) [Enabled ]
Link Rate (0=Auto, 1=1Gb, 2=2Gb, 4=4Gb) [Auto ]
Frame Size (0=512B, 1=1024B, 2=2048B) [2048 ]
Execution Throttle (Min=16, Max=256) [64 ]
Programmed Connection Option:
(0=Loop Only, 1=P2P Only, 2=Loop Pref) [Loop Pref ]
All attribute values for Port 1 that have been changed will now be saved.