Qlogic SANbox 6142, Руководство пользователя

Страница: 220 / 314

A – Command Reference
Set Command
A-48 FI0054601-00 A
Q
A list of attributes with formatting and current values will follow.
Enter a new value or simply press the ENTER key to accept the current value.
If you wish to terminate this process before reaching the end of the list
press 'q' or 'Q' and the ENTER key to do so.
WARNING:
The following command might cause a loss of connections to both ports.
Configuring iSCSI Port: 2
---------------------------
Port Status (0=Enable, 1=Disable) [Enabled ]
IP Address [10.3.5.107 ]
Subnet Mask [255.255.255.0 ]
Gateway IP Address [0.0.0.0 ]
Target TCP Port No. (Min=1024, Max=65535) [3260 ]
Jumbo Frames (0=Enable, 1=Disable) [Disabled ]
Window Size (0=8KB, 1=16KB, 2=32KB) [32768 ]
Window Scaling (0=Enable, 1=Disable) [Disabled ] 0
Window Scaling Factor (Min=0, Max=5) [0 ] 5
Link Rate (0=Auto, 1=10Mb, 2=100Mb, 3=1Gb) [Auto ] 3
Duplex (0=Auto, 1=Half, 2=Full) [Auto ]
Flow Control (0=Enable, 1=Disable) [Enabled ]
Header Digests (0=Enable, 1=Disable) [Enabled ] 0
Data Digests (0=Enable, 1=Disable) [Enabled ] 0
Max Burst (Min=512B, Max=262144B) [262144 ]
Max First Burst (Min=512B, Max=32768B) [32768 ]
VLAN (0=Enable, 1=Disable) [Disabled ] 0
VLAN Priority (Min=0, Max=7) [0 ]
VLAN ID (Min=1, Max=4094) [1 ] 34
All attribute values for Port 2 that have been changed will now be saved.