Qlogic SANbox 6142, Руководство пользователя

Страница: 38 / 314

2 – General Description
Serial Port
2-12 FI0054601-00 A
Q
The management Ethernet port has two LEDs:
■
The link status LED (green) is on continuously when an Ethernet connection has
been established.
■
The activity LED (green) is on when data is being transmitted or received over
the Ethernet connection.
2.12
Serial Port
The SANbox 6142 router is equipped with an RS-232 serial port for maintenance
purposes.
Figure 2-9 , following, shows the serial port location. It is labeled IOIOI .
You can manage the router through the serial port using the CLI.
Figure 2-9. Serial Port
The serial port connection requires a standard, eight-wire Ethernet cable and the
RJ45-to-DB9F adapter (supplied) to convert the Ethernet RJ45 connector to a
female DB9 connector.
Table 2-3 , following, defines the serial port pins for the
router’s RJ45 connector. Table 2-4 ., following, defines the pinout for the RJ45 to
DB9 adapter.
Table 2-3. Serial Port Pin Identification
RJ45
Pin Number
RJ-45
Pin Description
1 Clear to send (CTS)
2 Data set ready (DSR)
3 Receive data (RxD)
4 Signal ground (GND)
5 Data carrier detect (DCD)
6 Transmit data (TxD)
7 Data terminal ready (DTR)
8 Request to send (RTS)