Qlogic SANbox 6142, Руководство пользователя

Страница: 199 / 314

A – Command Reference
Ping Command
FI0054601-00 A A-27
Q
A.18
Ping Command
The ping command verifies the connectivity of each Ethernet port, management,
GE1 (iSCSI 1), and GE2 (iSCSI 2).
Authority
Admin session
Syntax
ping
Examples
The following is an example of the Ping command:
QRouter (admin) #> ping
A list of attributes with formatting and current values will follow.
Enter a new value or simply press the ENTER key to accept the current value.
If you wish to terminate this process before reaching the end of the list
press 'q' or 'Q' and the ENTER key to do so.
IP Address [0.0.0.0] 10.3.5.105
Iteration Count (Min=1, Max=10) [10 ]
Outbound Port (0=Mgmt, 1=GE1, 2=GE2) [Mgmt ] 1
Pinging 10.3.5.105 with 32 bytes of data:
Reply from 10.3.5.105: bytes=32 time=0.1ms
Reply from 10.3.5.105: bytes=32 time=<0.1ms
Reply from 10.3.5.105: bytes=32 time=<0.1ms
Reply from 10.3.5.105: bytes=32 time=<0.1ms
Reply from 10.3.5.105: bytes=32 time=<0.1ms
Reply from 10.3.5.105: bytes=32 time=<0.1ms
Reply from 10.3.5.105: bytes=32 time=<0.1ms
Reply from 10.3.5.105: bytes=32 time=<0.1ms
Reply from 10.3.5.105: bytes=32 time=<0.1ms
Reply from 10.3.5.105: bytes=32 time=<0.1ms
Ping Statistics for 10.3.5.105:
Packets: Sent = 10, Recieved = 10, Lost = 0
Approximate round trip times in milli-seconds:
Minimum = 0.0ms, Maximum = 0.1ms, Average = 0.0ms