3 – Managing Fabrics
Zoning a Fabric
3-34
59226-00 B
S
3.6.5.1
Creating a Zone in a Zone Set
When a zone is created, its zone type is soft. To change the zone type to a hard
zone, refer to
“Changing Zone Types” on page 3-37
for more information. Refer to
“Zones” on page 3-21
for information on zone types (soft and hard). To create a
zone in a zone set, do the following:
1.
Open the Zoning menu, and select
Edit Zoning
to open the Edit Zoning
dialog.
2.
Select a zone set.
3.
Open the Edit menu and select
Create a Zone
.
4.
In the Create a Zone dialog, enter a name for the new zone, and click the
OK
button. The new zone name is displayed in the Zone Sets dialog. A zone
name must begin with a letter and be no longer than 64 characters. Valid
characters are 0-9, A-Z, a-z, _, ^, $, and -.
5.
To add switch ports or attached devices to the zone, do one of the following:
In the zone set tree, select the zone set. In the graphic window, select
the port to add to the zone. Open the Edit menu and select
Add
Members
.
Select a port by port number, Fibre Channel address, or World Wide
Name in the Port/Device tree, and drag it into the zone.
Select a port by port number, Fibre Channel address, or World Wide
Name in the Port/Device tree. Right-click the zone and select
Add
Zone Members
from the popup menu.
6.
Click the
Apply
button to save changes to the zoning database.
NOTE:
If you enter the name of a zone that already exists in the
database, the SANsurfer Switch Manager application will ask if
you would like to add that zone and its membership to the zone
set.
Содержание SANbox 1400 Series
