Qlogic QLogic 12000 Series, Руководство по установке, Страница: 61 / 126

Installation
Bringing Up the System For the First Time
D000140-001 B 1-53
A
each command, refer the QLogic 12000 CLI Reference Guide.
Creating an 8x Port: 12200/12300
For the 12200 and 12300 switches, 8x DUOs are set up by combining the 4X port
on the bottom row with the 4X port directly above it (e.g., port 1 with port 19, port 2
with 20, port 3 with port 21, etc.):
Figure 1-41 12200/12300 8x DUOs
For example, to combine ports 2 and 20:
1. Log into the switch CLI with the login
admin
and password
adminpass
.
2. Enable port 2 with a command similar to:
ismPortSetWidth Cable02 7 -bounce
.
and press Enter .
3. Enable port 20 using same command as above, changing the port number
(i.e.,
Cable 20
).
4. At the switch, unplug and reinsert the cables to the physical ports. After
reinserting the first cable, the user has four (4) seconds to reinsert the
second cable associated with the 8x connection before the link begins
training.
NOTE:
For proper 8x functionality, it is required that both QSFP cables for a DUO