QEI ePAQ-9405, Руководство пользователя

Страница: 8 / 45

ePAQ-9405
User’s Guide
UG-1084
2

Specifications Copyright © 2017 QEI
2 Specifications
General Description
Microprocessor Atmel ARM9 32-bit Processor.
Communications Ports
Port 1: Maintenance
Interface USB
Connector Type B (J3)
Port 2: RS-232
Interface RS-232 TX, RX, RTS, CTS & COM.
Protocols Asynchronous Bit or Byte Oriented
Bit Rate 1200 to 115.2Kbps
Connector RJ45 (J4)
Port 3: Fiber Optic
Interface TX, RX
Protocols Asynchronous
Bit Rate 1200 to 115.2Kbps
Connector ST, multimode (J5) (FL optic)
Port 4: RS-485
Interface RS-485 A+, B- Earth Ground
Protocols Asynchronous , Bit or Byte Oriented
Bit Rate 1200 to 115.2Kbps
Connector 3 pin terminal block , TB5
Port 5: 100BaseFX
Interface Ethernet IEEE 802.3u compliant
Protocols IP (TCP, UDP)
Bit Rate Up to 100 Mbps
Connector
ST, multimode (J6)
Port 5: 10/100BaseT
Interface Ethernet IEEE 802.3 compliant, Auto MDI/MDI-X
Protocols IP (TCP, UDP)
Bit Rate Up to 100 Mbps
Connector Shielded RJ45 (J7)
Port 6: Irig-B Interface
Interface Fiber Optic, RS485, BNC
Protocol Irig-B
Connectors ST, multimode (J1), 3-pin terminal block (TB4), BNC Jack (J2)
Control Point Interface
Addressability 3 points (momentary on/off pairs or single on/off latching).
Contact Rating 10A @ 240VAC. (See ordering information)
Drive Voltage 30 VDC, nominal
Control Pulse Duration Programmable (250 msec., default)
Safety One relay operation at a time
Connector Two (2) 9-pin terminal blocks (TB2A, TB2B)
Status Point Interface
Addressability 12 points
Keying Voltage 12, 24, 48, 125 VDC