QEI ePAQ-9405, Руководство пользователя

Страница: 33 / 45

UG-1084 ePAQ-9405
User’s Guide
Copyright © 2017 QEI Test Panel

27
15.4.5 Remote Test Panel Connection (Ethernet Port)
Test Panel functions (except for controls) may be accessed remotely through
Ethernet Port 5 (J6 or J7) as follows:
1) Create a new HyperTerminal session.
2)
When prompted for connection parameters (“Connect To” box display), for
“Connect Using:” select TCP/IP.
3)
Another HyperTerminal window will appear asking for “Host address” and “Port
number”.
4)
The “Host address” to enter here is the MAC address of the ePAQ (programmed
using the ConfigWiz 2.0 software. See the ConfigWiz 2.0 Guide for further
information.)
5)
The “Port number” is always 57222.
6) After entering this information, press the <enter> key on the PC and verify that a
prompt is returned from the ePAQ.
7) Save the HyperTerminal session for future use (File/ Save As).
15.5 Security
Test Panel security can be set up using the ConfigWiz 2.0 configuration software.
Using ConfigWiz 2.0, test panel security is either enabled or disabled, and user ID
and passwords are set.
When security is disabled, the test panel responds to queries and commands from
any user.
When security is enabled, the test panel will prompt the user for an ID and password
on initial use, and after each five minute period of inactivity.