4. Installation
4. Installation
4) After all the battery modules are correctly connected, plug the Series-
Connected Plug (F) at the
YPLUG (V’) of the
last battery module to make a
complete
circuit.
X
+
1) Shut down the Q.HOME BAT-G1 system (refer to Section 5.4 Shutting Down
+
Q.HOME BAT-G1 System of User Manual on page 30)
2) Remove the lock cover
a. Pull the back end of the lock cover using a finger or an instrument.
b. Remove the lock cover and store for later use
3) Push the plastic button on each end of the power cable in the direction
of the arrow
Notes for Unplugging Power Cables
+
-
+
-
Lock Cover
22
23
DANGER!
CAUTION!
+
Do not plug or unplug the power cables when the Q.HOME BAT-G1
system is on. Doing so could result in an arc discharge which could
cause serious harm.
Capacity
XPLUG
CAN
GND
YPLUG
INSTALLATION AND OPERATION MANUAL LITHIUM-ION BATTERY – Q CELLS
Do not touch the two sheet metals of the power connector as it
can cause an electric shock. Also, do not connect the XPLUG
to the YPLUG on the same battery module.
4) Unplug the power cable
INSTALLATION AND OPERATION MANUAL LITHIUM-ION BATTERY – Q CELLS
