Q-See QSDT16PCRP, Руководство пользователя

Страница: 70 / 97

Q-See
SuperDVR & 8PCRP/8PCDP/16PCRP
User Manual
70
1. Protocol setup
Fig 7.35 P.T.Z Protocol setup
A. Protocol
Communication protocol of P.T.Z device
B. Port
Users can set serial port number
C. Address
Communication address of P.T.Z device (ID number)
2. Serial port setup
Users should first enable the P.T.Z control function of selected camera and
select a port number in P.T.Z Protocol Setup (refer to Fig7-30), and then set
corresponding parameters in the area below:
Fig 7.36 P.T.Z Serial port setup
A. Port
Users can set port number
B .Baud rate
Set P.T.Z device Baud rate, default value is 9600, used value must match
Baud rate on PTZ control board
C.Data bits
Default value is 8, used value much match Baud rate on PTZ control board.