Q-See QSDT16PCRP, Руководство пользователя

Страница: 31 / 97

SuperDVR & 8PCRP/8PCDP/16PCRP
User Manual
Q-See
31
4.6.2 View Map
Click to enter E-map, where the user can view distribution of all
cameras in the map, as in Figure4-16 View Cameras.
Figure4-16 View Cameras
When a channel alarm is triggered, the camera icon will flash a yellow alarm
signal. Select ‘
Auto Show ’, in case of an accidental alarm, an alarming
screen will pop out automatically and you can know about the alarming
position immediately. Click the camera head by right key to show the screen
on the spot.
NOTICE:
1. The map tree currently supports three levels and it is invalid for
any more then that.
2. For loading of a picture, when any side of length and width of the
picture exceeds size of picture frame, it will be enlarged and
shortened proportionally and standard size of picture frame is
833x678.
3. On this interface, click camera by right key to display the spot and
the 3316 card does not support this function temporarily.
4. If ‘Auto Show’ is set in case that E-map pops up by automatic
alarming, the E-map interface set with ‘Holding Time’ without any
operation and alarm will be close automatically. ‘Auto Show’ is
invalid when the E-map is opened manually.
5. The map in the E-map is the default demonstration map, and the
user can invite an engineering merchant to make the practical map
or draw a map by their own according to their actual needs, then
scan and save it in the computer to picture.