Q-See QSDT16PCRP, Руководство пользователя

Страница: 54 / 97

Q-See
SuperDVR & 8PCRP/8PCDP/16PCRP
User Manual
54
NOTICE: If you still cannot connect after enabling ActiveX, on many
systems you many have another option. You can go into internet options
in Internet Explorer, enter the IP address you use to access the DVR as a
trusted site, then go to the default level button and set move the bar
down to the low setting, click apply and ok. Do not select the option to
enable protected mode or require server verification. On Vista you may
get an “unknown publisher or publisher can’t be verified” error message.
If you get one of these messages you need to go to the advanced tab,
down to the security settings, put checkmarks in the options to allow
active content to run on my computer, and allow software to run or install
even if the signature is invalid, and remove the check for the option to
check for signatures on downloaded programs.
To connect to the DVR from the remote computer you would then open an
Internet Explorer browser window and enter the internet IP of your router that
you got by going to
www.myipaddress.com .
7.2.5 Unknown Publisher or Unsigned Program Error
If you get a error message that says the program cannot load because the
publisher is unknown or the program is unsigned, go to Internet Explorer,
Tools, Internet Options (refer to Fig 7.9), then go to the “Advanced” tab (RED
box in Fig 7.9), this will open the window in Fig 7.10, scroll down to “Security”,
and select the options to “Allow software to run or install even if the signature
is invalid”, and “Allow Active Content to Run Files on My Computer” (RED box
in Fig 7.10).
Fig 7.9 Advanced Options Fig 7.10 Invalid Signature