Q-See QSDT16PCRP, Руководство пользователя

Страница: 5 / 97

SuperDVR & 8PCRP/8PCDP/16PCRP
User Manual
Q-See
5
1
Introduction
1.1 Summarization
Thank you for choosing our digital video capture cards.
Our 8 Channel and 16 Channel cards use H.264 compression format, and
enable maximum 32 channels real-time or non-real-time surveillance. Our
cards are mature and cost-effective products that are ideal choices. They
enable synchronous audio and video compression and transmission, with
their powerful compression rate and network transmission function. They are
widely used in banks, intelligent communities, traffic management units,
medical systems, educational systems, armed forces and so on.
This manual is for SuperDVR 6.3.2.0, which is used by the QSDT8PCRP
，
QSDT16PCRP
，
and QSDT8PCDP cards.
In this manual, you will learn how to install the hardware and driver (software),
and how to setup the systems of this range of products. Please make sure
your operations with the products are strictly in accordance with the manual,
so as to keep the stability of the digital surveillance systems.
The following are standard functions of the products:
•
Schedule record mode
Users can choose any term in a day to record and set up record modes,
i.e. sensor alarm record, motion detection record, manual record,
Schedule Record.
•
Motion detection mode
Motion detection areas are adjustable and maximum 16 areas for each
channel. Users can also set motion detection sensitivity for each channel.
The system begins to record only when motion of the detected object
happens, and it will stop recording after a certain period, this function is
adjustable by users.
•
Sensor alarm record mode
With extra alarm board, the system enables alarm input and output.
•
Recycling record mode
Users can set recording storage sequence for HDD partitions. The
recording storage will automatically swap to the next partition when it is
full. If all the partitions are full and recycling record mode is enabled, the
former recorded data will be covered by new data. Users can also set
HDD minimum storage alarm. Then once the present storage space is
less then the minimum storage and recycling record mode is not enabled,
the record will automatically stop.