QSD2304L DVR User’s Manual
If so, compare the layout of your model to the below diagram to determine the
interfaces.
1
Power plug
2
Alarm in/alarm out
3
RS485
4
LAN port
5
Audio in 1-2
6
S-video output
7
Audio output
8
Video output
9
Video in 1-4
Fig2.2 Back Panel
2.4 Remote Control Operation
2.4.1 Setting up the Remote Control
Notice
: Please note that the Remote Control is not a standard part of this DVR. Your package might not include it.
Steps to prepare the Remote Control are described below:
STEP1
Put the battery into the Remote Control.
1.
Open the battery cover of the Remote Control.
2.
Put in two AAA batteries and make sure that they are not inserted upside down.
3.
Replace the battery cover.
STEP2
Check the following if the Remote Control does not work.
−
Are the battery’s anode and cathode in the correct position?
−
Do the batteries still have power?
−
Is there a barrier between the Remote Control and DVR?
5
