QSD2304L DVR User’s Manual
STEP8
The system will access the DVR automatically after finishing installation. The Network Client interface will be
displayed in IE browser, refer to Figure4-1.
Notice
: When the Network Client is running on VISTA operating system, you also need set relational ActiveX parameters. Steps for setting
parameters are as follows:
1. Open IE browser, then select ‘Internet Options > Advanced > Security’.
2. Enable ‘Allow software to run or install even if the signature is invalid’ and ‘Allow active content to run in files on my computer ’.
3.Click "
OK
" to finish the settings.
4.2 Main Interface
The function buttons of the remote surveillance software are shown in Fig4.2.
Fig4.2 Main Interface
45
