QSD2304L DVR User’s Manual
1.
HOLD TIME
This sets the record time after the alarm occurs. There are two options to choose: 1 minute and 2 minutes. It also sets the
time between alarms. If the HOLD TIME is 1 minute, the motion which is detected will only trigger the alarm once in 1 minute.
2.
CHANNEL
STEP1
Press "
Up
", "
Down
", "
Left
" and "
Right
" buttons to move the cursor.
STEP2
Press "
Enter
" key to switch to the channel which you want to set.
3.
DETECTION
"
DETECTION
" checked means motion detection is activated, unchecked means motion detection is disabled.
4.
SENSITIVITY
This is the sensitivity of the motion detection.
The range is from ‘1’ to ‘8’. The higher the value is, the higher the sensitivity is.
5.
TO REC
If select "
TO REC
" check box, DVR will record when there is a motion event. If not, DVR will not record.
6.
ALARM OUT
There are two alarm out options to choose: ALARMOUT1 and BUZZER.
7.
SCHEDULE
This is the schedule of the motion detection. The default schedule is everyday. Press "
SETUP
” button to set a motion
detection schedule.
8.
AREA
STEP1
Press "
Up
", "
Down
", "
Left
" and "
Right
" buttons to move the cursor.
STEP2
Press "
SETUP
" button to enter the Area Setup submenu.
It shows the setting of the detection area (refer to Fig3.11). The fuchsia color means the area is
unselected. The transparent live area means the area is selected. There are four options in the Detection Area
Setup:
−
ALL: The entire area will be detected.
−
CUSTOM: The area which you select will be detected.
18
