QSD2304L DVR User’s Manual
Fig3.20 IP Configuration
Fig3.21 System Information
This is the IP configuration of the DVR. There are three options to choose: STATIC, DHCP and
PPPoE. Static IP address is shown in the example.
STEP1
Press "
Up
", "
Down
", "
Left
" and "
Right
" buttons to move the cursor.
STEP2
Input IP Address, Subnet Mask and Gateway.
STEP3
Press "
OK
" button to modify the IP Configuration menu.
If selecting DHCP, the IP address will be automatically assigned by local network.
After selecting DHCP, you need to wait
about 30 seconds for the automatic assigned IP to be displayed on the system information window.
If selecting PPPoE, you need to set username and password when DVR connects to the internet. If you forget username and
password, please contact your ISP (internet service provider).
If you press "
INFO
" button, the System Information menu will be displayed on the screen when the DVR connects to the
network successfully (refer to Fig3.21).
Notice
:
•
If the network the DVR is connected to has the following items, we recommend using Dynamic IP.
1. The local area network has DHCP server.
2. DVR can get IP address automatically from internet.
•
Before you set PPPoE, you need to reboot the modem. After setting the PPPoE, you need wait for the program to accept the setting.
DDNS CONFIGURATION
DDNS Configuration submenu is shown as Fig3.22. The DVR supports DDNS server-‘88IP.net’. To
26
