PV Powered PVP2000 Скачать руководство пользователя страница 72 | Manualshive

Страница: 72 / 84

background image

60

•  Shipping or transportation damages.
•  Improper installation.
•  Improper maintenance.
•  Excessive voltage or current conditions from the electrical grid or PV

panels.

• Exposure to unsuitable environmental conditions (including but not

limited to damage due to lightning strikes, storm, fire, flood, etc.).

•  Unauthorized or abnormal use, repair, modification, or operation.
•  Negligence or accidents.
•  Material or workmanship not provided by PV Powered or its autho-

rized service centers.

This warranty also does not cover costs related to the removal, installation,

or troubleshooting of your electrical systems.

Disclaimer and Limitation of Liability

EXCEPT FOR THIS EXPRESS LIMITED WARRANTY, PV POWERED

EXPRESSLY EXCLUDES ALL WARRANTIES WITH RESPECT

TO THE INVERTER AND DATA MONITORING MODULE,

EXPRESS AND IMPLIED, INCLUDING BUT NOT LIMITED TO

THE WARRANTY OF MERCHANTABILITY, THE WARRANTY OF

FITNESS FOR A PARTICULAR PURPOSE, AND ANY WARRANTIES

THAT MAY HAVE ARISEN FROM COURSE OF DEALING OR

USAGE OF TRADE.
TO THE MAXIMUM EXTENT PERMITTED BY LAW, PV

POWERED’S AGGREGATE MONETARY LIABILITY TO THE

CUSTOMER FOR ANY REASON AND FOR ANY AND ALL CAUSES

OF ACTION, WHETHER IN CONTRACT, TORT OR OTHERWISE,

WILL NOT EXCEED THE AMOUNT PAID TO PV POWERED

FOR THE INVERTER OR DATA MONITORING DEVICE. PV

POWERED WILL NOT BE LIABLE TO YOU UNDER ANY CAUSE

OF ACTION, WHETHER IN CONTRACT, TORT OR OTHERWISE,

FOR ANY INDIRECT, SPECIAL, INCIDENTAL, CONSEQUENTIAL,

OR PUNITIVE DAMAGES, EVEN IF PV POWERED HAS BEEN

ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE

ORIGINAL PRICE FOR THE INVERTER AND DATA MONITORING

MODULE AND PV POWERED’S OBLIGATIONS UNDER THIS

EXPRESS LIMITED WARRANTY ARE CONSIDERATION FOR

LIMITING PV POWERED’S LIABILITY.
IF THIS PRODUCT IS A CONSUMER PRODUCT, FEDERAL LAW

DOES NOT ALLOW AN EXCLUSION OF IMPLIED WARRANTIES.

TO THE EXTENT YOU ARE ENTITLED TO IMPLIED WARRANTIES

UNDER FEDERAL LAW, TO THE EXTENT PERMITTED BY

«
...
70
71
72
73
74
...
»

Содержание PVP2000





















































































Отзывы:

Нет отзывов

Похожие инструкции для PVP2000

Бренд: Ramsey Electronics Страницы: 20

Бренд: V-TAC Страницы: 3

Бренд: Xantrex Страницы: 78

Бренд: Xanter Страницы: 54

Бренд: V2 Страницы: 48

Бренд: Wacker Neuson Страницы: 22

Бренд: TTI Страницы: 7

Бренд: StarTech.com Страницы: 3

Бренд: ADF Web Страницы: 30

Бренд: Guardian Страницы: 4

Бренд: Gorman-Redlich Страницы: 3

MAXX SST VEC049GM

Бренд: Vector Страницы: 10

Бренд: C&C TECHNIC Страницы: 2

Бренд: Lika Страницы: 2

Бренд: DAB Страницы: 18

STORAGE PACKAGE - BUSINESS

Бренд: SMA Solar Technology AG Страницы: 30

Бренд: Wentronic Страницы: 4

GTB-UHD600-18S-RT

Бренд: Gefen Страницы: 56

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды