Putzmeister BSA 1409 D4, Руководство по эксплуатации

Страница: 39 / 560

Safetyregulations
217
BP03_082_1901EN
2.6 Operating Instructions, operating procedures and other regulations
Personnel that are authorised to work on the machine must have
read the Operating Instructions, particularly the "Safety Regula
tions" section, and the Safety Manual before working with the ma
chine. Reading the instructions after work has begun is too late.
This applies especially to persons working only occasionally on the
machine, e.g. during setting up or maintenance.
As the operator, you must always make sure that the Operating In
structions are available. The Operating Instructions and check book
must always be kept to hand at the site of use of the machine (in
the tool compartment or container provided for this purpose).
As the operator, you must have personnel working on the machine
confirm in writing their knowledge, understanding and application
of the Operating Instructions and Safety Regulations and Safety
Manual. At regular intervals of at least once a year, check that per
sonnel are conscious of safety and the hazards involved in their
work and are taking account of the Operating Instructions.
Personnel entrusted with work on the machine must observe all
safety instructions and hazard warnings, and must be familiar with
the machine itself. You must practice all the operating procedures
described in the Operating Instructions (extending the supports,
operating the placing boom, shifting the placing boom into the driv
ing position, preparing the vehicle for moving, etc.) under the
supervision of a subject expert until you are certain you can ex
ecute them safely. Ask questions if there is something you have not
understood. Begin operating the machine only once you are fully
and explicitly familiar with the layout and significance of all the con
trol and monitoring devices and the method of operation of the ma
chine.
2.6.1 Operating Instruc-
tions