Putzmeister BSA 1409 D4, Руководство по эксплуатации

Страница: 138 / 560

Generaltechnicaldescription
362
BP22_957_1104EN
You can specify a value for the output at which the concrete pump
should switch off. The accuracy of the volumes indicated is depen
dent on the current fill level of the delivery cylinders. The more
accurately you enter the fill level in percent, the more accurate
thedisplay.
Enter the setpoint value for the output as follows:
"
Turn F4 to select the setpoint value.
å
The setpoint value is displayed in inverse video.
"
Then press F4 to activate the setpoint value.
å
The first digit of the setpoint value flashes.
"
Now turn F4 to change the first digit.
"
Press F4 to store the changed setting of the first digit.
å
The second digit of the setpoint value flashes.
"
Go through all the digits of the setpoint value in sequence.
Note
If you change the setpoint value, the actual value and the remaining
value will be reset to0".
Once the transfer tube has switched over for the first time, the
actualvalue starts to count the output achieved. The remaining
valueshows the output still to be achieved at the same time.
Note
As soon as the setpoint value is reached, the actual value and the
remaining value are reset to0".
Setpoint value for the
output
Specifying a setpoint
value for the output
Actual / remaining
value for the output