PURSUIT 2670 Denali, Руководство пользователя

Страница: 57 / 154

2670 DENALI
not use the carbon monoxide detector as a replacement for ordinary precautions or periodic
inspections of equipment. Never rely on alarm systems to save your life, common sense is still
prudent and necessary. Remember, the operator of the boat carries the ultimate responsibility
to make sure the boat is properly ventilated and the passengers are not exposed to dangerous
levels of carbon monoxide. You always should be alert to the symptoms and early warning signs
of carbon monoxide poisoning. You also should read the “Carbon Monoxide Detector” in the
Safety Equipment Chapter of this manual, and the owner’s manual supplied by the CO detector
manufacturer for operation instructions and additional information regarding the hazards and
symptoms of carbon monoxide poisoning.
ACTUATION OF THE CARBON MONOXIDE DETECTOR INDICATES THE PRES-
ENCE OF CARBON MONOXIDE (CO) WHICH CAN BE FATAL. EVACUATE THE
CABIN IMMEDIATELY. DO A HEAD COUNT TO CHECK THAT ALL PERSONS ARE
ACCOUNTED FOR. DO NOT REENTER THE CABIN UNTIL IT HAS BEEN AIRED
OUT AND THE PROBLEM FOUND AND CORRECTED.
8.4 Bilge Compartment Ventilation
Denali models are equipped with ventilation for the bilge compartment. A flow of air into the
bilge compartment is provided by four vents located on either side of the cockpit, under the
gunnel boards. This provides adequate air movement in the bilge compartments.
8.5 Maintenance
• Periodically lubricate all hinges, adjusters and latch assemblies with a light oil.
• Periodically clean and coat gasket materials with silicone to help keep them pliable.
• The opening cabin deck hatch and the curved section in each front corner of the windshield
are made of acrylic plastic glass. Acrylic glass scratches easily. Never use a dry cloth or glass
cleaning solutions on acrylic glass. Use a soft cloth and mild soap and water for routine
cleaning. Solvents and products containing ammonia can permanently damage acrylic glass.
Please refer to the Routine Maintenance chapter for more information on the proper
maintenance for acrylic plastic glass.
• Periodically return the carbon monoxide alarm to the manufacturer for testing and recalibration.
Please refer to the carbon monoxide alarm manual or contact the manufacturer for more
information on maintaining and calibrating the alarm.
8-3