PURSUIT 2670 Denali, Руководство пользователя

Страница: 61 / 154

2670 DENALI
Windshield
The Pursuit 2670 Denali is equipped with a vented
heavy duty aluminum windshield. The windshield
is equipped with opening panels on each side to
provide ventilation. To open the panels, loosen the
friction knobs on the windshield adjusters and turn
the locks on the vent panels to the unlocked position.
Open the panel to the desired position and tighten
the friction knobs. The adjusters will hold the
windshield panel in that position.
To close the vent panels, loosen the friction knobs on the adjusters and close the vent. Then
turn the panel locks on the windshield to the locked position and tighten the friction knobs on
the adjusters.
Note: To avoid damage to the wiper arms, be careful not to open the windshield vent
panels too far.
The front and side wing panels are tempered safety glass. The curved glass panels on the port
and starboard side of the windshield are made of tinted acrylic plastic glass.
Acrylic glass scratches easily. Never use a dry cloth or glass cleaning solutions on acrylic. Use
a soft cloth and mild soap and water for routine cleaning. Solvents and products containing
ammonia can permanently damage acrylic. Please refer to the Routine Maintenance chapter for
more information on the proper care and maintenance of acrylic plastic glass.
Aluminum Arch with Bimini Top and Side Curtains
The canvas for Pursuit boats is custom fit to each boat. The bimini top is designed with a
relatively flat profile and a snug fit. The canvas is fit to the boat at the factory and the bimini
top must be installed properly in order for the clear connector and side curtains to fit.
To install the Bimini top, attach the main legs to the hinges using the quick release pins and
attach the rear of the bimini canvas to the radar arch. Next, open the bimini and attach the front
bows to the deck hinges on the top of the windshield frame. Use your body weight on the front
corner of the bimini to pull down and stretch the fabric until the eye on the bow lines up with
the hole in the deck hinge. Secure each eye to the deck hinge with the quick release pins. The
bimini canvas should be stretched tight when both sides of the front bow are secured to the
windshield frame.
Attach the clear connector to the zipper at the front of the top and snap it to the top of the
windshield frame beginning with the center snaps. If the bimini top is adjusted properly, the
clear connector will have to be stretched just enough to pull out the wrinkles and reach the
snaps on the windshield. The front bow will continue to bear the main load of the top.
9-3
Windshield