PURSUIT 2670 Denali, Руководство пользователя

Страница: 84 / 154

2670 DENALI
• Leave a written message listing details of your planned cruise with a close friend ashore
(Float Plan). The float plan should include a description of your boat, where you intend to
cruise, and a schedule of when you expect to arrive in the cruising area and when you expect
to return. Keep the person informed of any changes in your plan to prevent false alarms. This
information will tell authorities where to look and the type of boat to look for in the event you
fail to arrive.
• Check the amount of fuel on board. Observe the “rule of thirds”: one third of the fuel for the
trip out, one third to return and one third in reserve. An additional 15% may be consumed
in rough seas.
• Check the water separating fuel filters for water.
• Check the oil in the engines or engine oil tanks.
• Turn on the battery switches.
• Check the bilge water level. Look for other signs of potential problems. Monitor for the scent
of fuel fumes.
• Test the automatic and manual bilge pump switches to make sure the system is working
properly.
THERE MUST BE AT LEAST ONE PERSONAL FLOTATION DEVICE ON BOARD
FOR EVERY PERSON ON BOARD AND ONE THROW-OUT FLOTATION DEVICE.
CHECK THE U.S. COAST GUARD STANDARDS FOR THE CORRECT TYPE OF DE-
VICE FOR YOUR BOAT.
• Have a tool kit aboard. The kit should include the following basic tools:
Spark plug wrench Hammer
Spark plug gap gauge Electrician’s Tape
Screwdrivers Lubricating Oil
Pliers Jackknife
Adjustable Wrench Vise Grip Pliers
Needle Nose Pliers Wire Crimping Tool
End Wrench Set Wire Connector Set
• Have the following spare parts on board:
Extra light bulbs Spark plugs
Fuses and circuit breakers Flashlight and batteries
Drain plugs Engine oil
Propellers Fuel filters
Propeller nuts Fuel hose and clamps
12-4