PURSUIT 2460 Denali, Руководство пользователя

Страница: 86 / 132

2460 Denali
• Have a tool kit aboard. The kit should include the following basic tools:
Spark Plug Wrench Hammer
Spark Plug Gap Gauge Electrician’s Tape
Screwdrivers Lubricating Oil
Pliers Jackknife
Adjustable Wrench Vise Grip Pliers
Needle Nose Pliers Wire Crimping Tool
End Wrench Set Wire Connector Set
THERE MUST BE AT LEAST ONE PERSONAL FLOTATION DEVICE ON BOARD FOR EV-
ERY PERSON ON BOARD AND ONE THROW-OUT FLOTATION DEVICE. CHECK THE U.S.
COAST GUARD STANDARDS FOR THE CORRECT TYPE OF DEVICE FOR YOUR BOAT.
• Have the following spare parts on board:
Extra light bulbs Spark plugs
Fuses and circuit breakers Flashlight and batteries
Drain plugs Engine oil
Propeller(s) Fuel filters
Propeller nut Fuel hose and clamps
• Make sure all fire extinguishers are in position and in good operating condition.
VAPORIZING LIQUID EXTINGUISHERS GIVE OFF TOXIC FUMES; USE ONLY COAST GUARD
APPROVED FIRE EXTINGUISHERS.
12.4 Operating Your Boat
GASOLINE VAPORS CAN EXPLODE. BEFORE STARTING THE ENGINE, OPERATE THE
ENGINE COMPARTMENT BLOWER FOR FOUR (4) MINUTES, OPEN THE ENGINE HATCH,
INSPECT THE FUEL SYSTEM AND CHECK THE ENGINE FOR THE ODOR OF GASOLINE
VAPORS. ALWAYS OPERATE THE BLOWER WHILE THE ENGINES ARE AT IDLE. DO
NOT START OR OPERATE THE ENGINES IF FUEL FUMES ARE PRESENT. UNDER NO
CIRCUMSTANCES SHOULD THIS PROCEDURE BE OVERLOOKED.
After Starting the Engines:
• Visibly check the engines to be sure there are no apparent water, fuel or oil leaks.
12-4