PURSUIT 2460 Denali, Руководство пользователя

Страница: 39 / 132

2460 Denali
Chapter 4:
ELECTRICAL SYSTEM
4.1 General
Your Denali is equipped with a 12-volt D.C. electrical system that draws current from on-board
batteries.
The batteries are charged by the engine. All 12-volt power is distributed to the 12-volt accessories
through individual circuit breakers located in the 12-volt switch panels. A main circuit breaker
located near the battery switch protects the system from an overload. Another circuit breaker near
the switch protects the circuit for the automatic float switch for the bilge pump. Most 12-volt
accessories are operated directly by switches in the helm and accessory switch panels.
There are electrical schematics included in this manual to aid in following an individual circuit of
the boat.
PROPER FUSE OR BREAKER PROTECTION MUST BE PROVIDED FOR ALL
12-VOLT EQUIPMENT ADDED. DO NOT OVERLOAD THE ACCESSORY
CIRCUIT BREAKERS OR OTHER CIRCUITRY THROUGH ADDITIONAL 12-
VOLT EQUIPMENT.
4.2 Batteries
Pursuit electrical systems are designed to use lead-acid type batteries. Your boat has provision for
two batteries. These batteries should be of the size and capacity recommended by the manufacturer
of your engine. See the engine owner's manual. These specifications should be considered to be
the minimum size battery required. Consider increasing the capacity of the battery if you will be
trolling, drift fishing or have extensive electronics on board. Larger batteries will give you
additional capacity to operate the livewell, washdown, and electronics at low speed when the
charging system output of the engines is minimal.
4-1