PureTools PT-IPAV-E2-RX, Руководство пользователя

Страница: 11 / 24

User Manual
PT-IPAV-E2
11
5.2 Preparing the switch
When doing point to many and many to many, it requires a switch to distribute the sources. We suggest you use
the Switch that supports IGMP and DHCP. IGMP feature help to manage the group ID which is related to switch
the sources; DHCP allow the switch to assign an IP for TX and RX automatically, please enable DHCP of the
switch.
5.3 Connection
Note: Please don’t insert into or pull out HDMI cable when power on. Please connect cable only when power is off.
5.3.1 Point to point
1. Connect the source device and the Transmitter unit with HDMI Cable.
2.
Connect the HDMI looping output of the Transmitter to the local HDMI display.
3. 3. Connect another HDMI display and the HDMI Receiver unit with HDMI Cable.
4. Connect the Transmitter and Receiver with Cat5e/6 cable
5. Connect the IR TX cable into “IR TX” port of the transmitter; Connect the IR RX cable into “IR RX” port of the
receiver. Then you can control the source at the RX side with IR.
6. Connect one RS-232 Cable from the PC or automation system to the RS-232 port on the Transmitter; Connect
one RS-232 cable from the Receiver to the RS-232 device to be controlled.
7. Power on Transmitter and Receiver with adapter 5V 1A.
Note: Insert/Extract cables gently.