PureLink by Dtrovision
20
character “!” is found at the end of the Command code, which tells the system to execute the
command.
For example, the command code
*255DI01O00!
It can be interpreted as follows: (*) Starting the command code (255) Switcher ID is 255 (D) Disconnect on
(I01) Input 01 to (O00) Output 00 (!) take the command. For a complete list of command characters and their
functions, see the command list below
1. Enter the Disconnect command below. Replace the “#”s with the input and output number(s).
*255DI#O#!
Examples (Disconnect
Video
):
Command Codes
Action
*255DI01O00!
Disconnect both video and audio input 1 to no output
(00)
*255DI00O03,04,05!
Disconnects both video and audio outputs 3, 4, and 5
*255DI00O03-06!
Disconnects both video and audio output 3, 4, 5, and 6
*255DALLIO!
Disconnects both video and audio all inputs and
outputs
Response example
*255DI01O00!
☞
response
*255sDI00O01,I00O04!
if input 1 to output 1 , 4 connected
Hardware Checking:
User can check the Hardware status.
Example:
Command Codes
Action
*255?HARDST!
Check Hardware status
