PureLink by Dtrovision
19
For example, the command code *255CI01O01!
can be interpreted as follows: (*) Starting the command code (255) Switcher ID is 255 (C) Create connection
on (I01) Input 01 to (O01) Output 01 (!) take the command. For a complete list of command characters and
their functions, see examples below.
•
Create settings command (UX-4400)
*255CI01O01,I01O02,I02O03,I04O04!
Connect both input 1 to output 1 and input 1 to output 2 , input 2 to output 3 , input 4 to output 4
☞
response
*255sCI01O01,I01O02,I02O03,I04O04!
•
Create settings command (UX-8800)
*255CI01O01,I01O02,I02O03,I04O04,I05O05,I06O06,I07O07,I08O08!
☞
response
*255sCI01O01,I01O02,I02O03,I04O04,I05O05,I06O06,I07O07,I08O08!
Examples (Connect
Video
):
Command Codes
Response
*255CI01O01!
*255sCI01O01!
*255CI01O08,I08O02!
*255sCI01O08,I08O02!
*255CI01O01,I02O02,I03O03!
*255sCI01O01,I02O02,I03O03!
*255CI01O01,02,03!
*255sCI01O01,I01O02,I01O03!
*255CI01O01-06!
*255sCI01O01,I01O02,I01O03,I01O04,I01O05,I01O06!
** I00 : Disconnect
Example :
*255CI00O01!
: output 1 disconnect
☞
response
*255sCI00O01!
4.7 Disconnecting Switches
The characters and numbers in a Disconnect command tell the system which input or output to
disconnect. The “D” key initiates a Disconnect command for routing a switch. The characters and
numbers that follow the “D” command tell the system that inputs and outputs to disconnect. The last
