PureLink UX-4400 Скачать руководство пользователя

Страница: 5 / 41

PureLink by Dtrovision

1.4 Product Introduction

The UX Series 4K HDMI Matrix Switchers provide high performance distribution of audio and

video resolutions up to Ultra HD/4K with advanced EDID management and HDCP 2.2 compliance.

Available in fixed I/O configurations from 4x4 to 8x8, the UX Series incorporates the latest technologies in

Ultra HD/4K transmission including HDMI 2.0b

and CEC support. PureLink’s legendary Auto-EDID system

ensures compatibility across multiple display types, delivering consistent connectivity and quick, clean

switching from source to display for a seamless presentation experience.

4x4 or 8x8 HDMI 2.0b Matrix Switching

PureLink’s UX Series Matrix Switchers are available in the 4x4 (UX-4400) and 8x8 (UX-8800)

configurations

Supported Resolutions

Video resolutions up to

Ultra HD/4K

4096 x 2160 @50/60Hz (RGB 4:4:4 YCbCr 4:4:4, 4:2:2, 4:2:0)

Full 3D up to 1080p@60Hz

HDMI v2.0b Compatibility

Full 3D & 48-Bit Deep Color support, 7.1 Channel Dolby TrueHD & DTS MasterHD

HDR (High Dynamic Range)

BT2020 color representation

Control Options:

Front panel buttons

Built-in RS-232C and LAN for external control via PC, Controller, and Web UI

HDCP 2.2 Compliance on all Inputs and Outputs

Содержание UX-4400










































Результаты поиска

Содержание UX-4400

Отзывы:

Похожие инструкции для UX-4400

Бренды по названию

Популярные бренды

PureLink UX-4400, Руководство пользователя

Результаты поиска

Содержание UX-4400

Отзывы:

Похожие инструкции для UX-4400

Бренды по названию

Популярные бренды