Pureline Crystal Pure 3.0 ABG, Руководство пользователя

Страница: 8 / 14

6
WIRING
The Power must be turned off before performing any wiring. Be sure to follow local and
NEC electrical codes. To provide safe operation, the The Crystal Pure 3.0 ABG must be
properly grounded and bonded.
INPUT POWER
CFW only for 120 V AC input power . Wire the The Crystal Pure 3.0 ABG to the
LOAD SIDE of the filter pump timer.
It is very important that the The Crystal Pure 3.0 ABG is powered only when the
pump is running.
ELECTROLYTIC CELL AND FLOW SWITCH
The electrolytic cell and flow switch cables have connections on the ends that plug into
the The Crystal Pure 3.0 ABG for easy attachment and removal. See pic attached
above. The The Crystal Pure 3.0 ABG above ground Salt Chlorinator has an Auto
control system with very simple operation.
OUTPUT LEVEL CONTROL: There are 10 LEDS, each LED equals 10%. Chose the
“desired level %” by pressing Min to decrease or Max to increase. the The Crystal Pure
3.0 ABG will produce chlorine according to the “Desired Level %” adjustment setting for
the entire filter cycle.
MAX: Press Max to increase the level up to 100%, when you have an abnormally high
bather load, heavy rainfall, cloudy water conditions, or any other condition which
requires that a large amount of purification be introduced. Push Max until all 10 LEDS
ARE ON. This electronically “Max chlorinates” (shocks) the water for 24 hours (filter
pump must be on during this time) or until the power has been turned off, whichever
comes first.
At the end of the Max chlorination period, be sure to push Min to
decrease level back to the desired level position
.
MIN: Press Min to decrease the desired level. When all the 10 LEDs are OFF, it will
prevent the The Crystal Pure 3.0 ABG from energizing the electrolytic cell. In this
position there is no chlorine generation.
LOW SALT:
When flashing, the salt level is low and the The Crystal Pure 3.0 ABG
generating at low efficiency. When illuminated steady, the salt level is too low and the
The Crystal Pure 3.0 ABG has shut down.