Pureline Crystal Pure 3.0 ABG, Руководство пользователя

Страница: 10 / 14

8
model, it will take you days to find ideal chlorine output, you can start at a high setting and then
turn down.
MAINTENANCE
When checking other water chemistry levels, always monitor the salinity level of the swimming
pool.After the system runs for a period of time, it will eventually need to clean the cells due to the
scaling of natural minerals.
You will be notified by opening "CHECK CELL" Light. When lit, cleaning the cell with a cleaning
stand is better.
Important information: The frequency of cleaning depends on your water chemistry and water
saturation index.
For most people, only need to clean a few times per season. Faster mineral accumulation must
be long-term high saturation index, chemical imbalance may lead to rapid fouling. Consult
Swimming pool professionals.
HOW TO CLEAN THE CELL?
Important information: If there is severe mineral accumulation, more than one cleaning may be
required to dissolve the remaining solids.
After cleaning, carefully inspect the cell plate with bright light. If you see any remaining scale,
debris or physical blocked in the salt cell, please repeat the cleaning process as needed. If it is
"check cell" come back soon after cleaning,
1) Confirm that the salinity is within the range
2) Ensure that the cell is fully filled with water
3) Verify the cell type setting of the system
Before removing the cell for cleaning or replacement:
1) Turn off all power sources of all swimming pool equipment and close the water supply line
valve (if applicable).
2) Unplug the cell cable connecting to the control box.
3) Loosen the threaded ring around the joint at the junction of the pool and the pipes.
To clean the cell with mineral deposits:
1) Cleaning stand and adjust the direction of the cell vertically. Place on the ground and stabilize
to keep it upright.