7
CELL CHECK:
When the cell is working, the green light is on.
INDICATOR LED
POWER STATUS:
Power illuminate, model is in power.
WATER FLOW:
When it is on, flow switch will be detected that there is no flow through
the cell. If it is flashing, the flow is restored.
LOW SALT:
When it is on or flashing, The Crystal Pure 3.0 ABG salinity is too low to work.
Note:
Before adding large quantities of salt, it is recommended to have your salt level
professionally checked.
Note:
If the Salt level is at the correct level but the LOW SALT LEVEL is still on, the cell
must be replaced.
HIGH SALT:
When illuminated the salt level is around 4500 ppm. When illuminated
steady, salt level is higher than 5400 ppm and the The Crystal Pure 3.0 ABG has shut
down. The pool water must be diluted with fresh water before operation is restored.
OPERATION
By familiarizing yourself with the operation of the The Crystal Pure 3.0 ABG generator, you can
achieve maximum performance for your pool. When chemical levels are in the recommended
range, there are FOUR factors that you can control. Filter time each day, amount of salt in the
pool, the output of chlorine you set, and stabilizer level in the water will directly impact the
amount of chlorine the The Crystal Pure 3.0 ABG will generate.When you just begin to set the
Содержание Crystal Pure 3.0 ABG
Страница 1: ...SALT CHLORINATOR FOR ABOVE GROUND POOLS Crystal Pure 3 0 ABG rystal Pure 3 0 ABG...
Страница 6: ...4...
