Pulsar MicroFlow-i, Инструкция по эксплуатации

Страница: 55 / 56

Page 49
Chapter 8 Parameter record
Device Information Parameters
Processing Parameters
Parameter Details Entered Values
No. Description Default 1 2 3 4 5
P240
&
P241
Serial No. Read Only
P261 Firmware ID Read Only
P262 Hardware ID Read Only
Parameter Details Entered Values
No. Description Default 1 2 3 4 5
P102 Gain 120
P104 Quick Resp Damp Factor 800
P108 Cal Factor 100
P109 High/Main damping 0
P113 Step response 0 = Off
P115 Low damping persist 2
P116 High damping persist 1
P117 No signal persist 2
P118 Signal present persist 2
P120 Minimum Flow cut off 150 (mm/s)
P125 Response 0 = Slow
P152 Multi Cal point 1 at 0.2 m/s 100
P153 Multi Cal point 2 at 0.4 m/s 100
P154 Multi Cal point 3 at 0.8 m/s 100
P155 Multi Cal point 4 at 1.5 m/s 100
P156 Multi Cal point 5 at 3.0 m/s 100
P157 Multi Cal point 6 at 5.0 m/s 100
P158 Multi Cal mode On/Off 0 = Off
P834 Low velocity for mA Span 0
P835 High velocity for mA Span 6