Pulsar INTE, Инструкция

Страница: 4 / 20

www.pulsar.pl INTE
4
3. Installation.
The Ethernet interface should be mounted inside the enclosure of the PSU. The connection
between the power supply with Ethernet interface and the router should be made with a twisted pair with
RJ45 connectors. The role of the access point controlling the data flow is done by a router connected to
a PC via Ethernet cable.
Fig.2. Schematic diagram of Ethernet network communication.
Interface installation:
1. Install the Ethernet interface in the enclosure of the PSU.
2. Connect the „SERIAL” sockets on the interface module and on the PCB of the power supply
using the included cable.
3. Plug the RJ45 connector of the twisted pair into the Ethernet interface. Plug the other end of the
twisted pair to the router "LAN" socket.
4. The router "LAN" socket should be connected to the network card of the computer using a RJ45 -
RJ45 cable.