Pulsar INTE, Инструкция

Страница: 3 / 20

www.pulsar.pl INTE
3
Features:

connection to the ETHERNET network via the RJ45 connector

compliance with the IEEE 802.3 standard
 10/100BaseT physical layer
 transmission speed 10/100Mbps (auto-sensing)
 full-duplex or half-duplex operation (auto-sensing)

built-in web server for configuration

data encryption: DES, 3DES, AES

assigning a static or dynamic IP address (DHCP server)

galvanic isolation between the Ethernet interface and the power supply

power supply via the „SERIAL” socket
 cooperation with PowerSecurity program
 optical indication
 warranty - 5 years from the production date
1. General description.
The ETHERNET network interface is a device used to connect power supplies of the PSBEN or EN54
series to a PC via the Ethernet connection. The PowerSecurity software enables remote monitoring of parameters
through a cyclical preview of the current status of the power supply, reading the event log and diagrams of currents
and voltages and performing remote battery test.
2. Components arrangement.
The figure below shows the distribution of the major components and connectors of ETHERNET interface.
Fig.1. The interface view.
Table 1. Description of the components.
Element nr Description
[1]
LED lights – optical indication:
PWR – supply voltage
TX – transmitting data
RX – receiving data
[2] RST button – resetting the interface settings
[3] INIT button – initialization of the interface
[4] RJ45 socket
[5] SERIAL socket for connection with the power supply
[6] Green LED light – signaling the operating status
[7] Yellow LED light – Ethernet connection indication