Stage 3. Mounting CORE unit on
a day device
Insert firmly the
CORE
unit with mounted
attachment’s eyepiece
into the
cover adapter so that the pins in adapter’s body enter grooves
of the
attachment’s eyepiece
. Turn the
CORE
unit counterclockwise to hear a
click.
Tighten the screw
(2
0
)
with the
hex-nut wrench
, to ensure that when turning
the lever, the adapter with insert tightly fits the objective lens of
day device
.
Mounting eyepiece on CORE unit
To mount the eyepiece on the unit, make sure that the lower salients
(C)
of
the eyepiece match the lower yellow salients
(Fig. 5)
.
Insert the eyepiece into the unit’s body and turn the locking ring
(5)
clockwise.
Stage 2. Installing the cover adapter on
day device
(using metal
Cover-adapters DN42/50/56 mm” (SKU#79124/79125/79126)
Select a cover adapter with an insert (bought separately) of the required
diameter depending on the outer diameter of the
objective lens
of the day
device
.
The figures 42 mm, 50 mm, 56 mm in adapter's model name correspond
to the optical diameter of the
lens of your day device
.
Measure the outer diameter of the housing of the
lens of your day device
and select an insert based on
the
data in the table below.
Example.
If the lens diameter of your day
device
is 42mm, and the
measured outer diameter of the housing of the
lens of your day device
is
47.2 mm, you need to use an insert with marking “Ø 47”.
Compatibility chart of inserts for
day devices
Remove the cover
(13)
from the Cover by turning it counterclockwise.
Install the insert
(14)
into the adapter
(15)
all the way in
(Fig.4)
Important! The insert must be installed with the narrowed part
facing downward.
Install firmly the adapter with the insert onto the objective lens
(1
7
)
of an
day device
(Fig.4)
.
Snap the lever
(1
8
)
from the original
OPEN
position to the
CLOSE
position
(Fig.4)
. Check that the adapter firmly fits the objective lens.
If you see there is a clearance, please:
- Loosen the locking screw
(
19
)
with the hex-nut wrench (S=2mm).
8
9
Fig.4
42
50
56
59
.
7-60
.
6
60
.
7-61
.
6
61
.
7-62
.
6
60
61
62
62
.
7-63
.
6
63
64
63
.
7-64
.
6
65
64
.
7-65
.
6
46
.
7-47
.
6
47
.
7-48
.
6
48
.
7-49
.
6
47
48
49
49
.
7-50
.
6
50
54
.
7-55
.
6
55
.
7-56
.
6
56
.
7-57
.
6
55
56
57
57
.
7-58
.
6
58
59
58
.
7-59
.
6
4
5.5
45.5
4
6
46
4
6.5
46.5
51.6
51.6
53.4
53.4
Pic.
5
correct
wrong
Tighten the screw
(2
0
)
with hex-nut wrench (S=4mm)
with a clamping
force necessary to ensure that the adapter fits tightly the objective lens.
Tighten the locking screw
(
19
)
.
С
Having turned the unit on, please make sure that the line of
horizon of you day device is parallel to the upper and lower edges
of the display of the CORE monocular.
It is recommended that you
de
grease the
objective lens of your day
device and the inner side of the insert
before installing the cover adapter.
