FLOWCERT LITE (UL) INSTRUCTION MANUAL
32
Hot Keys
There are five hot keys on the keypad, which can be used to quickly access
common parameters for viewing only, while in Run Mode. Pressing the hot
key once will display the first parameter, then repeated pressing will display
the others, then the FlowCERT reverts to Run Mode. In program mode, they
have different functions, the functions are shown below.
HOT KEY
RUN MODE
PROGRAM MODE
When application is Flow, you can view
the non-resettable totalizer. View and
reset the resettable totalizer.
Not used with FlowCERT Lite
Displays echo confidence, echo
strength, height above loss limit (HALL),
average noise, peak noise and
temperature
Not used with FlowCERT Lite
Not used with FlowCERT Lite
Reset parameter to default
setting
Instantaneous mA output
Not used with FlowCERT Lite
Dependent on application. Displays
distance, level, space, flow or rate of
change of level, velocity (if velocity
sensor attached)
Toggle relay setpoints
between units of measure and
% of span.
Not used with FlowCERT lite
Takes you to the last
parameter edited when you
first enter program mode.
Shows details of function type, firmware
revision and serial number
Enter decimal point.
∑
mA
n
Содержание FlowCERT
Страница 1: ...FlowCERT Lite UL Instruction Manual...
Страница 2: ...2...
Страница 14: ...FLOWCERT LITE UL INSTRUCTION MANUAL 14 EU Certificate of Conformity...
Страница 142: ...FLOWCERT LITE UL INSTRUCTION MANUAL 142 NOTES...
