To set:
To delete:
Position boom at the desired
minimum radius.
Push
to delete minimum
radius limit and exit the function.
Push
to set current working
radius as minimum radius limit.
To set:
To delete:
Position boom at the desired
maximum radius.
Push
to delete maximum
radius limit and exit the function.
Push
to set current working
radius as maximum radius limit.
Operation, Calibration & Service Manual
LinkBelt - DS350 1334 Console
To set / delete minimum radius limit:
Screen shows (with
current radius value):
This takes you back to the previous screen, “Set / Delete Radius Limits”:
Screen now shows symbol with a black bar to the left and the set value
for min. radius limit, if you have set one.
(If you did not set a minimum radius limit, there will be no left black bar and
no radius value displayed).
Pushing
will accept setting and quit function.
To set / delete maximum radius limit:
Screen shows (with
current radius value):
This takes you back to the previous screen, “Set / Delete Radius Limits”.
Screen now shows symbol with a black bar to the right and the set value
for max. radius limit, if you have set one.
(If you did not set a maximum radius limit, there will be no right black bar
and no radius value displayed).
Pushing
will accept setting and quit function.